Gas analyzer, Common rail injector tester, Brake lathe, steam car washer cleaner, Wheel balancer

	The lift Mod. KEF 25000 for up to 25 ton can be emplowed for all types of heavy vehicles, although it has been developed particularly for coach and bus servicing and maintenance work.
	Control Box Lifting and lowering comanded by means if two push buttons. An internal transformer allows operation at 24 V. Lockable switch.

	Locking control At any intermediate lifting height you can alleviate the cable load by operating the locking contorl and lowering the lift a few cm.
	Safety device Electro-magnetically operated blocking wedges and an electrical anti-obstacle device for lift lowering plus calbe breakage. If device operation is triggered by an obstacle, the lift can be raised from the control bos; if it is triggered by cable breakage, the lift will remain completely blocked and cannot be operated from the control box.

Safety elements and devices
	12 ton and 25 ton lifts are equipped with the following safety systems;
	Mechanical safety against cable breakage and electrical safety to avoid dangerous unlevel.
	Electrical safety against obstacles during lowering process, to avoid danerous unlevel.
	Protection in pulley areas.
	Safety device against vehicle slippage.
	Safety supports. The load is supported on four wedges (one on each colum), taking the load off the cables.
	Height limit switch. A mechanical stop limits the upward stroke of the piston.
	Deadman commnads for lifting and lowering.

*The manufacture reserves the right to change the product specifications without notice and liability.